PicoBNC+ Automotive 10:1 scope probe & adaptor

£45.00

The TA499 has a fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition.

Most network analysis will require two channels to be analysed – please ensure that you order a minimum of 2 probes.

This accessory is only available for PicoBNC+ and will not work with older PicoScope models.

 

Out of stock

Description

This is the equivalent of the existing TA375 Oscilloscope probe, and a TA197 10:1 attenuator.

The TA499 has a fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition.

The length of the earth lead has been increased on the TA499 and it is also supplied with an adaptor tip (TA411) allowing the probe to be used with any of the 4mm clips.

The TA499 is automatically recognised by PicoScope software when it is connected to the scope.

Most network analysis will require two channels to be analysed – please ensure that you order a minimum of 2 probes.

This accessory is only available for PicoBNC+ and will not work with older PicoScope models.